User Guide

English
42
USING THE PROJECTOR
Change Password
Change the password.
First time  :
Press the "Enter" key to set the password.1.
The password has to be 4 digits. 2.
Use number button on the remote control or on-screen numeric keypad to enter your new password 3.
and then press the "Enter" key to conrm your password.
Change Password  :
(If your remote does not have a number keypad, please use the arrows to change each digit of
the password, then press the “Enter” key to conrm).
Press the "Enter" key to input old password.1.
Use the number button or on-screen numeric keypad to enter the current password and then press the 2.
"Enter" key to conrm.
Enter new password (4 digits in length) using the number buttons on the remote control, then press 3.
the "Enter" key to conrm.
Enter the new password again and press the "Enter" key to conrm.4.
If the incorrect password is entered 3 times, the projector will automatically shut down.
If you have forgotten your password, please contact your local ofce for support.
The password default value is "1234" (rst time).Note:
REMOTE
Enter Security Code (4 digits)
Exit
Choose "Exit" to exit the menu.