Mobile LED Projector User’s Manual
Important Safety Instruction CLASS 1 LED PRODUCT Eye Safety Warnings Avoid staring/facing directly into the projector beam at all times. Keep your back to the beam as much as possible. A stick or laser pointer is recommended to avoid the need for the user to enter the beam. When projector is used in a classroom, adequately supervise students when they are asked to point out something on the screen. In order to minimize power, use room blinds to reduce ambient light levels. A.2.9.
Product Overview 4 5 6 7 3 19 20 1 2 2 18 3 8 9 10 11 12 13 14 15 16 17 18 20 21 Remote Control 111 Focus Dial 222 Speaker 333 Ventilation (outlet) 444 Lens 555 IR Receiver 666 Touch Panel 777 Power Button ( ) 888 Kensington Lock 999 AC Input 1111 SD Card Slot 1111 USB Type A Port (Memory Stick/WiFi/HDD) 1111 Micro USB Port 1111 VGA Connector 1111 HDMI Connector 1111 Video In 1111 Audio / AV In 1111 Headphones Connector 1111 Ventilation (inlet) 1111 Ceiling Mount Holes 2222 Elevator Foot
Adjust Projected Image Height Adjust the Projected Image Projection Distance (A) Meter Screen Size - Width (B) Screen Size - Height (C) Screen Diagonal (D) feet (mm) (inch) (mm) (inch) (mm) (inch) 0.50 1.64 360.0 14.2 220.0 8.7 422 16.6 0.90 2.95 640.0 25.2 400.0 15.7 757 29.8 1.50 4.92 1070.0 42.1 670.0 26.4 1262 49.7 1.80 5.91 1290.0 50.8 800.0 31.5 1516 59.7 2.40 7.87 1710.0 67.3 1070.0 42.1 2022 79.6 3.00 9.84 2140.0 84.3 1340.0 52.8 2527 99.
Connect input source - Composite AV in Insert SD Card Insert an SD card into the slot with the gold contacts facing down. 1. C onnect the AV input source. (~) 2. After powering on the projector, press direct source button on the remote or swipe left or right on the touch panel. 1 LOCK 2 or 1 For video and audio input 2 •• To remove the SD card, push the card to eject it from the slot. •• Do not remove the SD card while the projector is projecting image from the card.
How to Use the Menu Tap it Touch Panel (TP) Swipe Left Remote Control (RC) Swipe Right Up Button OK Button Swipe Up •• RC: Use / / / to highlight the desired option and press to confirm the selection. TP: Swipe Left/Right/Up/Down to highlight the desired option and Tap / One Click to confirm the selection. •• Buttons functionality varies depending on the current mode.
How to Adjust Volume - Source: SD Card / USB Flash Drive •• Press / on the remote control or swipe Up/Down on the touch pad to adjust volume.
How to Play Videos - Source: SD Card / USB Flash Drive Playing Videos from the SD Card, or USB Flash Drive 1. Select Data Source 2. Select Video Menu The screen, the source icon on the button guide, and the sequence in which screens appear vary depending on the available data source. WiFi Display HDMI SD Card VGA Auto Searching USB Video Setup The displayed screen may vary depending on the selected data source on the previous step. RC: Press / to select the menu item.
How to Play Videos - Video Playback Mode The button guide disappears when the keypad is not used for 5 seconds. To display the button guide, press Enter key. Media Playback Control + Rewind + Play 2x, 4x, 8x, 16x, and 32x + Fast forward 2x, 4x, 8x, 16x, and 32x + Setting Advanced setting + Repeat Play Repeat all Pause Repeat one Repeat disabled SRS SRS Off Treble + Bass Press / key to switch On / Off SRS. When switch off SRS, press / key to select Treble and Bass.
How to View Photos - Source: SD Card / USB Flash Drive Viewing Photos from the SD Card, or USB Flash Drive 1. Select Data Source 2. Select Photo Menu The screen, the source icon on the button guide, and the sequence in which screens appear vary depending on the available data source. WiFi Display HDMI SD Card VGA Auto Searching USB Video Setup The displayed screen may vary depending on the selected data source on the previous step. RC: Press / to select the menu item.
How to View Photos - Mode: Photo Preview Mode The button guide disappears when the keypad is not used for 5 seconds. To display the button guide, press Enter key. Setting Menu Media Playback Control + Slideshow + Rotate Clockwise 90 degree + Setting Advanced setting + Display mode + Contrast and Brightness + Slideshow period + Back Slideshow on Slideshow off Brigt mode PC mode Photo mode Cinema mode Brightness: Press / key to increase/decrease the brightness.
How to View Documents - Source: SD Card / USB Flash Drive Viewing Documents from the SD Card, or USB Flash Drive 1. Select Data Source 2. Select Document Menu The screen, the source icon on the button guide, and the sequence in which screens appear vary depending on the available data source. WiFi Display HDMI SD Card VGA Auto Searching USB Video Setup The displayed screen may vary depending on the selected data source on the previous step. RC: Press / to select the menu item.
How to View Documents - View Mode The button guide disappears when the keypad is not used for 5 seconds. To display the button guide, press Enter key. Setting Menu Media Playback Control + Slideshow + Zoom in Zoom in the page + Zoom out Zoom out the page + Setting Advanced setting + Display mode + Contrast and Brightness + Slideshow period + Back Slideshow on Slideshow off Brigt mode PC mode Photo mode Cinema mode Brightness: Press / key to increase/decrease the brightness.
How to Adjust the Settings 1. Select "Setup" menu 2. Enter "Setup" Menu Information WiFi Display HDMI SD Card VGA Auto Searching USB Video Setup Keystone WiFi Channel Sleep Timer Projection Language Direct Power On Reset Setting Menu Control Automatically turn off the projector at a preset time. Sleep Timer + Sleep Timer Sleep Timer Sleep Timer On Off Switch to front projection or rear projection.
How to Adjust the Setting Setting Menu Control WiFi Channel + WiFi Channel Press “Enter” to Switch Wifi channel (from 1 to 11) Press “Enter” to return the display parameters on all menus to the factory default settings. Reset + + Reset Back Back to parent menu.
WiFi Display Mode WiFi Display Mode When using WiFi Display function for the first time, install "MirrorOp Lite" software into your PC: 1. From the Windows desktop, double-click "setupMirrorOpSender.exe". Follow the on-screen instructions to complete the software installation. 2. See the WiFi Dongle User Manual for more details. 3. View WiFi Display 2. Select "WiFi" menu 1. Plug in the WiFi Dongle The projector is only compatible with "Optoma Wireless Dongle".
VGA Mode / Video Mode / HDMI Mode 1. Select "VGA" / "HDMI" / "Video" menu 2. Display the submenu 3. Select the item VGA Submenu Item Menu WiFi Display Home HDMI HDMI SD Card VGA VGA Auto Searching Video Volume USB Video Setup Advanced Home menu Exit Advanced SRS Brightness Contrast 3D Mode Off 3D Sync No Phase Clock Select External Source Exit HDMI Submenu Item Submenu Control + + + + + + On Bright LED Mode Home Go to Home menu. HDMI Change to HDMI source.
Upgrade Firmware Software updates can be obtained from the Computer. 1. On your computer, create a folder named "upgrade". 2. Download the latest firmware from www.optoma.com and save it in the "upgrade" folder. 3. Copy the "upgrade" folder to the root folder of the SD card. 4. Insert the SD card into the SD card slot of the projector and then press the Power button. 5. Follow the steps below. 1. Wait to Complete 18 2.
Compatible VGA / Video Mode Compatibility: Document Timing Table The projector uses Picsel File Viewer to open and view Microsoft® office files and Adobe® PDF files.
Troubleshooting Appendix If you experience a problem with your projector, please refer to the following information. If a problem persists, please contact your local retailer or service center. Clause for Office / Document Viewer The copyright is owned by Picsel to avoid rights violated by end customer and third parties. 1. All IPR, including but not limited to copyright, in the Picsel Products is owned by Piscel or its supplier. 2.
Optoma Global Offices For service or support please contact your local office. USA 3178 Laurelview Ct. Fremont, CA 94538, USA www.optomausa.com 888-289-6786 510-897-8601 services@optoma.com Deutschland Wiesenstrasse 21 W D40549 Düsseldorf, Germany +49 (0) 211 506 6670 +49 (0) 211 506 66799 info@optoma.de Canada 2420 Meadowpine Blvd., Suite #105 Mississauga, ON, L5N 6S2, Canada www.optoma.ca 888-289-6786 510-897-8601 services@optoma.
