S CU FO Pico Pocket Projector User’s Manual
Important Safety Instruction CLASS 1 LED PRODUCT Eye Safety Warnings Avoid staring/facing directly into the projector beam at all times. Keep your back to the beam as much as possible. A stick or laser pointer is recommended to avoid the need for the user to enter the beam. When projector is used in a classroom, adequately supervise students when they are asked to point out something on the screen. In order to minimize power, use room blinds to reduce ambient light levels. A.2.9.
Product Overview 20 micro SD 11 15 Universal I/O 2 8 3 16 21 12 mini HDMI 17 9 5 10 13 19 Micro USB FOCUS 1 Audio out 14 7 22 18 AV IN 6 DC IN 4 23 1. Lens 2. Right Button ( ) 3. Cancel / ESC Button ( ) 4. Up Button ( ) 5. OK Button ( ) 6. Left Button ( ) 7. Focus Dial 8. Down Button ( ) 9. Home Button ( ) 10. LED Indicator 11. Lanyard 12. Speaker 13. DC Input 14. Audio Out Connector 15. IR Receiver 16. Universal I/O Connector 17. Mini HDMI Connector 18.
Charge the Battery 1 SH PU 2 3 When the low battery icon ( ) is displayed on the projected screen, replace the battery immediately or connect the power adapter to charge the battery. Press the Power button to turn the projector on or off. For first time use, the Language screen appears. 1. Highlight the desired language. ( ) 2. Select the item. ( ) 1. Make sure the projector is turned off. 2. Insert the plug. () 3. Connect the power adapter. (~) 4. During charging, the LED indicator lights red.
in Insert Data Source - MicroSD Card By default, the projector displays from the internal memory. However if a microSD card is inserted, the projector reads from the microSD card first. Insert a microSD card into the slot with the gold contacts facing down. To remove the microSD card, push the card to eject it from the slot. 3 1 2 or 1 iPod For video and audio input 2 or 1 Audio input only iPod 2 Connect Computer 1 MOLEX 2 for 1. Connect the AV device using the appropriate cable. (~) 2.
How to Use the Menu Enter Music menu Enter Office Viewer menu • Press the corresponding button of the desired option. • Press to go back a previous screen. Enter Video menu Enter Photo menu Select input source signal Enter Setup menu A button guide appears on the lower left corner of most screens (see below). The guide varies depending on the current mode. Press the corresponding button to select the option or operation. Return to the Home menu Home menu Submenu Travel Video Travel Day1.
How to Play Videos - Source: Internal Memory / USB Flash Drive / MicroSD Card / External Source Playing Videos from the Internal Memory, MicroSD Card, or External Source If an external source (USB) is inserted, the external memory is read first. If you want to read data from the microSD card or internal memory, press in the appropriate screen to change the data source. See steps below. 2.
How to Play Videos - Video Playback Mode The button guide disappears when the keypad is not used for 3 seconds. To display the button guide, press any key except or . Repeat Icons Adjust volume Pause/Play Rewind Repeat all Back to previous screen Repeat one Repeat off Return to Home menu Fast forward To change repeat settings, see Video Settings below. Video Settings 1. Select "Setup" 2.
How to Play Music - Source: Internal Memory / USB Flash Drive / MicroSD Card / External Source Playing Music from the Internal Memory, MicroSD Card, or External Source If an external source (USB) is inserted, the external memory is read first. If you want to read data from the microSD card or internal memory, press in the appropriate screen to change the data source. See steps below. 2.
How to Play Music - Playback Mode The button guide disappears when the keypad is not used for 3 seconds. To display the button guide, press any key except or . Summer Unknow Unknow Next Song: Rainbow.
How to View Photos - Source: Internal Memory / USB Flash Drive / MicroSD Card / External Source Viewing Photos from the Internal Memory, MicroSD Card, or External Source If an external source (USB) is inserted, the external memory is read first. If you want to read data from the microSD card or internal memory, press in the appropriate screen to change the data source. See steps below. 2.
How to View Photos - Full Screen Mode The button guide disappears when the keypad is not used for 3 seconds. To display the button guide, press any key except or . Play slideshow Rotate 90° clockwise Next photo Rotate 90° counter-clockwise Previous photo Return to Home menu How to View Photos - Slideshow Mode In Slideshow mode, photos are played continuously at a specified interval time while playing music stored in the internal memory as background. 1.
Slideshow Settings 1. Select "Setup" 2. Select "Slideshow" Video Setting Music Setting Back Display Setting Slideshow System 3. Adjust Settings Setup Timer: 2-second interval Timer: 5-second interval Timer: 10-second interval Background music on Background music off Compatibility: Photo Compatible Photo Format File Format BMP JPG JPEG File Extension *.bmp, *.jpg *.
How to View Documents - Source: Internal Memory / USB Flash Drive / MicroSD Card / External Source Viewing Documents from the Internal Memory, MicroSD Card, or External Source If an external source (USB) is inserted, the external memory is read first. If you want to read data from the microSD card or internal memory, press in the appropriate screen to change the data source. See steps below. 2.
How to View Documents - View Mode The button guide disappears when the keypad is not used for 3 seconds. To display the button guide, press any key except or . S Move left Page up Move right Page down Exit View mode Pan up, down, left, right (in zoom mode) Return to Home menu FOCU Zoom in 1x ~ 4x Display Settings 1. Select "Setup" 2. Select "Display Setting" Video Setting Music Setting 3.
Select Menu Language 1. Select "Setup" 2. Select "System" 3. Select "Language" Video Setting Music Setting Back Display Setting Slideshow System Setup Language Information Firmware Update Reset Back System 4. Select Language 5. Confirm language / Return to Home menu Select your preferred menu language.
Upgrade Firmware Software updates can be obtained from the OPTOMA website (www.optoma.com / www.optoma.eu /www.optoma.com.tw). 1. On your computer, create a folder named "upgrade". 2. Download the latest firmware from www.optoma.com and save it in the "upgrade" folder. 3. Copy the "upgrade" folder to the root folder of the microSD card. 4. Insert the microSD card into the microSD card slot of the projector. 5. Follow the steps below. 1. Select "Setup" 2.
Reset the System Resetting the System by Reset Menu When the system is reset, all files stored in the internal memory will be deleted. Ensure all files are backed up before resetting. 1. Select "Setup" 2. Select "System" Video Setting Music Setting Back Display Setting Slideshow System Setup 4. Confirm Reset Yes No Reboot the projector 18 3.
How to Use External Input Source: VGA / Composite AV / HDMI Selecting Input Source When the projector is not in playing mode nor reading from an external source, the projector automatically detects once a video source device is connected and turned on. A message appears on screen. When multiple input source devices are connected at the same time, the last connected device will be detected. Yes VGA 800 x 600 VGA is detected Change to VGA? 10 Sec.
Input Source Settings Changing Aspect Ratio Settings 1. View Source Content Display mode Display button guide 2. Select "Aspect Ratio" 3. Scroll Aspect Ratio Setting 16:9 - 16:9 Scroll option 4. Confirm Setting 4:3 When no key is pressed within 10 seconds, the aspect ratio icon automatically disappears and its setting is applied. 4:3 Scroll option Scroll option AUTO AUTO Adjusting Contrast Settings 1. View Source Content Display mode Display button guide 2.
Input Source Settings Adjusting Brightness Settings 1. View Source Content Display mode Display button guide 2. Select "Settings" 3. Select "Brightness" 4. Adjust Setting Exit brightness settings Scroll other settings: Contrast, Sharpness, Color Mode, LED Mode, Brightness Return to Home menu When no key is pressed within 10 seconds, the brightness icon automatically disappears and its setting is applied. Selecting LED Mode Settings 1.
Input Source Settings Selecting Color Mode Settings 1. View Source Content Display mode Display button guide 2. Select "Settings" 3. Select "Color Mode" 4. Adjust Setting Exit color mode settings Scroll other settings: LED Mode, Brightness, Contrast, Sharpness, Color, LED Return to Home menu Color Mode settings Extended: Use to project more vibrant colored pictures When no key is pressed within 10 seconds, the color mode icon automatically disappears and its setting is applied.
How to Upload Files to Internal Memory When a computer is connected via USB, the projector automatically detects the connection and the message below appears on screen. Files can be transferred to the internal memory or microSD card if installed. 2. Upload Files by Computer 1. Confirm Transfer Yes or No 3. Unplug the USB Cable Returns to the previous screen Displayed screen varies depending on the last session. The screen turns black after 60 seconds for power saving.
Media File Specs: Definitions Media File Specs: Video Containers Video Containers Term Description LBR Low bit rate SP Simple Profile ASP Advanced Simple Profile MP Main Profile ML Main Level in MPEG2 or Medium Level in VC-1 BP Baseline Profile Media File Specs: Audio / Image Containers Container Video Decoder Audio or Speech Decoder Container .3gp H.263 H.264 HE-AAC .mp4 .avi H.263 H.264 MPEG4 Xvid MP3 HE-AAC PCM/G.711 .cmb H.264 HE-AAC .
Appendix Copyright / Trademark Clause for Office / Document Viewer The copyright is owned by Picsel to avoid rights violated by end customer and third parties. 1. All IPR, including but not limited to copyright, in the Picsel Products is owned by Piscel or its supplier. 2. The End User may not: Copyright © Optoma Company Limited. All rights reserved. • make copies of the Picsel Products or make them available for use by third parties.
