Operation Manual

37
English
User Controls
SETUP | Security
Security

On: Choose “On” to use security verication when turning on
the projector.

Off: Choose “Off” to be able to switch on the projector without
password verication.
Security Timer
Use this function to set how long (Month/Day/Hour) the projector
can be used. Once this time has elapsed you will be requested to
enter your password again.
Change Password

First time:
1. Press “Enter” to set the password.
2. The password has to be 4 digits.
3. Use four directional select keys on the remote to enter your
new password and then press “Enter” key to conrm your
password.

Change Password:
1. Press “Enter” to input old password.
2. Use four directional select keys to enter current password
and then press “Enter” to conrm.
3. Enter new password (4 digits in length) using the four
directional select keys on the remote, then press “Enter” to
conrm.
4. Enter new password again and press “Enter” to conrm.
Password default
value is “1234” (rst
time).
“Security” depends
on model’s speci-
cations.