User manual

Menu
13
Press > Date/Time.
• Use the arrow keys on the remote control to move
through the selections.
• Press the keypad to enter numeric values.
• Select Apply to save and apply changes.
Network
You can update the content of your storage card by
connecting to DS-Server or InfoSAP Creator. Set up your
Digital Signage Processor to connect to the server in the
Network submenu.
The Network submenu allows you to configure your Digital
Signage Processor for the network. You can:
• Set network configuration
• Set proxy
• Set DNS
• Set DS-Server
• View the MAC address
By default, the network is set to DHCP. When DS-Server is
set up, the Digital Signage Processor connects periodically
with the server to report current status or settings. You can
MENU
DATE/TIME
NETWORK
PROGRAM
TIMER
LANGUAGE
VIDEO OUT
PLAY MODE
MEMORY CARD
IR CONTROL
Date:
mm/ dd / yyyy
01 / 01 / 2008
Time:
hh : mm : ss
00 : 00 : 00
NTP Server: 220 . 130 . 158 . 51 Sync
Sync Time Everyday
Time Zone
to setup the system date/time and time-synchronization
Press [Exit] to return.
Apply