User manual

Menu
25
Please refer to the picture below.
3. Select the system driver then press .
4. When the message appears on the screen,
select “Yes” and press to start.
5. The Digital Signage Processor starts
upgrading and displays a message.
6. When the upgrade is complete, a
message appears on screen and the
Digital Signage Processor reboots.
Content Update Mode from USB memory:
Set up the content update mode in this section. Select
Difference Write or Write after Delete.
When the Digital Signage Processor boots up, it checks the
USB memory first.
If you set Difference Write mode, only files with different
time/date stamps or new files inlcuded on the USB memory
but not on the SD card are updated. Files on the SD card but
not on the USB card are deleted.
If you set Write after Delete mode, all content files in the
media folder are deleted. The content files in the USB
memory are then copied to the SD card.
DATE/TIME
NETWORK
PROGRAM
TIMER
LANGUAGE
VIDEO OUT
PLAY MODE
MEMORY CARD
IR CONTROL
UPGRADE
SYSTEM
to upgrade the firmware
Press [Exit] to return.
Select library in the USB memory:
lib-ds-player_0623.img
SET
It will start upgrading.
Do you want to continue?
Yes
No
SET
Upgrading... Please do not power-off.
Upgrading is finished. System will reboot now.