User manual

Safety Instructions & Warranty
iv
Safety Instructions
Use the following safety guidelines to help protect yourself and your
Digital Signage Processor.
• Do not attempt to service the Digital Signage Processor yourself.
Always follow installation instructions closely.
• To avoid personal injury from electric shock or fire:
• Completely power down the Digital Signage Processor when cleaning the
Digital Signage Processor, its components, or chassis, or performing
operations requiring similar steps. To do this, first turn the power off, then
disconnect the AC adapter from the electrical outlet or from any other type
of external power source.
• Do not operate the Digital Signage Processor near water, for example, near
a kitchen sink or laundry tub, in a wet basement, by a swimming pool, or in
the rain.
• Do not push objects into air vents or openings of your Digital Signage
Processor. Doing so can short out interior components and may cause fire or
electric shock.
• Operate the Digital Signage Processor at the recommended
temperature range of +0°C to +40°C (+32°F to +104°F). Store it at a
temperature of -10°C to +60°C (+14°F to +140°F).
Power Cord & adapter Warnings
• See the Installation Instructions before connecting to the power
supply.
• Be sure that the power outlet you plug the power cord into is easily
accessible and located as close to the equipment operator as possible.
• When using your power cord, make sure to position it around objects so
it is not cut or punctured.
• Use only the power cord provided for use with this Digital Signage
Processor in accordance with the table below.
* When operating the Digital Signage Processor with its AC 125-240V power supply, use a power
supply cord that matches the power supply voltage of the AC power outlet being used.
Plug Type
Country U.S.A. /Canada EU (except U.K.) U.K.
Voltage 120* 230 230