Mobile LED Projector User’s Manual
Important Safety Instruction CLASS 1 LED PRODUCT Eye Safety Warnings Avoid staring/facing directly into the projector beam at all times. Keep your back to the beam as much as possible. A stick or laser pointer is recommended to avoid the need for the user to enter the beam. When projector is used in a classroom, adequately supervise students when they are asked to point out something on the screen. In order to minimize power, use room blinds to reduce ambient light levels. A.2.9.
Product Overview 9 10 11 22 23 1 2 3 4 5 6 7 11 8 12 13 14 15 16 17 SD Card VGA 18 19 20 S-Video Video Audio/AV in 21 24 mini USB Remote Control 1. Speaker 2. Auto Source Button ( 3. Up Button ( ) 4. Power Button ( ) ) 5. OK Button ( 6. Left Button ( ) 7. Down Button ( ) 8. Right Button ( ) 9. Focus Dial 10. Lens 11. IR Receiver 12. Kensington Lock 1. Zoom Button 2. Power Button 3. Up Button 4. Menu Button 5. OK Button 6. Left Button 7. Aspect Ratio Button 8. Down Button 9.
Adjust Projected Image Height Adjust the Projected Image Projection Distance (A) The projector is equipped with an elevator foot for adjusting the projected image height. Screen Size - Width (B) Screen Size - Height (C) Screen Diagonal (D) Meter inch (mm) (inch) (mm) (inch) (mm) (inch) 0.5 20.18 366.2 14.4 228.9 9 432 17 0.9 35.62 646.2 25.4 403.9 15.9 762 30 1.5 59.36 1077 42.4 673.1 26.5 1270 50 1.8 71.23 1292.3 50.9 807.7 31.8 1524 60 2.4 94.98 1723.1 67.
Connect Computer for USB Display By default, the projector displays from the internal memory. However if an SD card is inserted, the projector reads from the SD card first. CK 2 Insert SD Card LO 1 You can project your computer display using the projector's mini USB port. 1 Connect a laptop or PC using the supplied mini-USB to USB Type-A cable. 2. Turn on the projector. 3. Press / / / to highlight mini-USB > USB Display to enter USB and press display mode.
How to Use the Menu OK Button Up Button Left Button •• Use / / / to highlight the desired option and press selection. •• Buttons functionality varies depending on the current mode. to confirm the A button guide appears on the lower left corner of most screens. The guide varies depending on the current mode. Press the corresponding button to select the option or operation. Right Button Down Button Home menu Submenu Travel runner.avi summer.avi unfair.avi runner.
How to Play Videos - Source: Internal Memory / SD Card / USB Flash Drive Playing Videos from the Internal Memory, SD Card, or USB Flash Drive If an SD card is inserted, the content of the memory card is read first. If you want to read data from the internal memory or USB flash in the appropriate screen to drive, press change the data source. See steps below. 2.
How to Play Videos - Video Playback Mode The button guide disappears when the keypad is not used for 3 seconds. To display the button guide, press any key. Highlight this icon and to exit press video playback mode. Media Playback Control Increase volume + Rewind Decrease volume + Fast forward + Pause + Previous video clip + Play + Next video clip Video Settings 1. Select "Setup" 2. Enter "Setup" Menu 3. Enter "Video Setting" Menu 5. Select Option 4.
How to Play Music - Source: Internal Memory / SD Card / USB Flash Drive Playing Music from the Internal Memory, SD Card, or USB Flash Drive If an SD card is inserted, the content of the memory card is read first. If you want to read data from the internal memory or USB flash in the appropriate screen to drive, press change the data source. See steps below. 3.
How to Play Music - Playback Mode The button guide disappears when the keypad is not used for 3 seconds. To display the button guide, press any key. Highlight this icon and to exit press music playback mode. Media Playback Control + Increase volume + Play Decrease volume + Previous track Pause + Next track Music Settings 1. Select "Setup" 2. Enter "Setup" Menu 3. Select "Music Setting" 5. Select Setting 4. Enter "Music Setting" Menu Home menu 6.
How to View Photos - Source: Internal Memory / SD Card / USB Flash Drive Viewing Photos from the Internal Memory, SD Card, or USB Flash Drive If an SD card is inserted, the content of the memory card is read first. If you want to read data from the internal memory or USB flash in the appropriate screen to drive, press change the data source. See steps below. 3.
How to View Photos - Mode: Slideshow at Full Screen During slideshow, photos are played continuously at a specified interval time while playing music stored in the internal memory as background. The button guide disappears when the keypad is not used for 3 seconds. To display the button guide, press any key. •• To change slideshow interval settings and enable/disable background music, see Slideshow Settings below. •• Make sure that background music setting is "On" to enable this feature.
How to View Documents - Source: Internal Memory / SD Card / USB Flash Drive Viewing Documents from the Internal Memory, SD Card, or USB Flash Drive If an SD card is inserted, the content of the memory card is read first. If you want to read data from the internal memory or USB flash in the appropriate screen to drive, press change the data source. See steps below. 3.
How to View Documents - View Mode The button guide disappears when the keypad is not used for 3 seconds. To display the button guide, press any key. Advanced menu mode Full screen view Report Report Media Playback Control (Advanced Menu Mode) Media Playback Control Previous page Next page or Zoom in/out page Page up Move to the left Enter advanced menu mode Page down Exit advanced menu mode Move to the right Return to file list Select Menu Language 1. Select "Setup" 2.
View Projector Information 1. Select "Setup" 2. Enter "Setup" Menu 3. Select "System" 5. Select "Information" 4. Enter "System" Menu Home menu 6. Enter "Information" Menu 7.
Reset the System When the system is reset, all files stored in the internal memory will be deleted. Ensure all files are backed up before resetting. 1. Select "Setup" 2. Enter "Setup" Menu 3. Select "System" 5. Select "Reset" 4. Enter "System" Menu Home menu 6. Enter "Reset" Menu 8. Wait to Complete 7.
Upgrade Firmware Software updates can be obtained from the OPTOMA website (www.optoma.com / www.optoma.eu /www.optoma.com.tw). 1. 2. 3. 4. 5. On your computer, create a folder named "upgrade". Download the latest firmware from www.optoma.com and save it in the "upgrade" folder. Copy the "upgrade" folder to the root folder of the SD card. Insert the SD card into the SD card slot of the projector. Follow the steps below. 1. Select "Setup" 2. Enter "Setup" Menu 3. Select "System" 5. Select "Upgrade" 4.
USB Mode USB Display Mode When using USB Display function for the first time: 1. From the Windows desktop, browse for "USB Display V1.0.1" drive and double-click "dlusb_launcher.exe", see "Data Transfer Mode" below. 2. USB display is not MAC compatible. 1. Select "mini-USB" 2. Enter "mini-USB" Menu 3. Enter "USB Display" Mode 5. View PC Display 4. Connect to PC Home menu Prepare DOUSB... Press to exit USB display mode. Data Transfer Mode 1. Select "mini-USB" 2. Enter "mini-USB" Menu 3.
Adjust Menu Settings for External Input Source: VGA / Composite AV / HDMI Selecting Input Source Once a video source device is connected and turned on, press to switch input source. TM Entering Menu Mode Menu Operation Select main menu Enter current submenu Hide OSD menu Submenu Operation Move up Press mode.
External Input Setting Picture Menu 3. Adjust Settings 1. Select Submenu Adjust setting Select item Color Mode (Bright / PC / Movie / Picture / User) Adjust setting Wall Color (White / Light Yellow / Light Blue / Pink / Dark Setting) Adjust setting Brightness (0~100) Adjust setting 2. Enter Submenu Contrast (0~100) Adjust setting Sharpness (0~100) Adjust setting 4.
External Input Setting Screen Menu 3. Adjust Settings 1. Select Submenu Select item Adjust setting Aspect Ratio (AUTO / 4:3 / 16:9 / 16:10) Adjust setting Overscan (Off / On) Adjust setting 2. Enter Submenu Digital Zoom (0~100) Adjust setting Auto Keystone (Off / On) 4.
External Input Setting Setting Menu 3. Adjust Settings 1. Select Submenu Select item Adjust setting Language (English / Italian / Polish / Korean / German / Spanish / Russian / Traditional Chinese / Turkish / French / Portuguese / Swedish / Japanese / Simplified Chinese) Adjust setting Location (Front Desktop / Rear Desktop) Adjust setting Menu Position (Top Left / Top Right / Center / Bottom Left / Bottom Right) 2. Enter Submenu Adjust setting 4.
External Input Setting Options Menu 3. Adjust Settings 1. Select Submenu Adjust setting Select item Auto Source (Off / On) Adjust setting Fan Mode (Off / On) Adjust setting Information Hide (Off / On) Adjust setting Background Color (Black / Blue) 2. Enter Submenu Adjust setting LED Settings 4.
Compatible VGA / Video Mode Compatibility: Document Timing Table Mode VGA YPbPr, HDMI Resolution V-Sync (Hz) 640 x 480 60 800 x 600 60 1024 x 768 60 1280 x 720 60 1280 x 800 60 480i / 480P 60 576i / 576P 50 720P 50 / 60 1080i / 1080P 50 / 60 The projector uses Picsel File Viewer to open and view Microsoft® office files and Adobe® PDF files.
Media File Support List: Image/Music Troubleshooting Image If you experience a problem with your projector, please refer to the following information. If a problem persists, please contact your local retailer or service center.
