User's Manual

46
English
User Controls
1. Turn on DHCP to allow the DHCP
server to automatically assign an IP, or
manually enter the required network
information.
2. Then choose apply and press “
” button to complete the conguration
process.
3. Open your web browser and type in from
the OSD LAN screen then the web page
will display as below:
How to use web browser to control your projector
When you used the projector IP ad-
dress, you will can not link to your
service server.
4. Based on network web-page for the
input-string in [tools] tab, the limitation for
Input-Length is in the below list (“space”
and the other punctuation key included):
Category Item
Input-Length
(characters)
Crestron Control
IP Address 15
IP ID 2
Port 5
Projector
Projector Name 10
Location 9
Assigned To 9
Network
Conguration
DHCP (Enabled) (N/A)
IP Address 15
Subnet Mask 15
Default Gateway 15
DNS Server 15
User Password
Enabled (N/A)
New Password 15
Conrm 15
Admin Password
Enabled (N/A)
New Password 15
Conrm 15