Operation Manual
Command Description Remark (Parameter)
Cong-URL Device’s IP address
LAN IP address is shown up if
LAN IP address is valid.
Wireless LAN IP address is
shown up if Wireless LAN IP
address is valid.
http://xxx.xxx.xxx.
xxx/index.html
Revision The revision must follow a major.
minor.micro scheme. The revision
is only increased if the command
protocolismodied.
1.0.0
• BeiBreitbildauösungen(WXGA)istdieKompatibilitätsunterstützung
von den jeweiligen Notebook/PC-Modellen abhängig.
• Diese AMX-Funktion dient nur der Unterstützung von AMX Device
Discovery.
• Die Sendeinformation versendet nur über die gültige Schnittstelle.
• LAN- und WLAN-Schnittstellen können gleichzeitig unterstützt werden.
• Bei Nutzung von „Beacon Validator“ beachten Sie bitte die
nachstehenden Informationen.
Unterstützte PJLink™-Befehle
Die nachstehende Tabelle zeigt Befehle zur Steuerung des
Projektors mittels PJLink™-Protokoll.
Anmerkung zur Befehlsbeschreibung (Parameter)
Command Description Remark (Parameter)
POWR Power control
0 = Standby
1 = Power on
POWR? Inquiry about the
power state
0 = Standby
1 = Power on
2 = Cooling down
3 = Warming up
INPT INPT Input switching
11 = VGA1
Hinweis
79
Deutsch
Anhänge