Operation Manual

81
Dansk
Bilag
Command Description Remark (Parameter)
INPT? Inquiry about input
switching
12 = VGA2
13 = Component
14 = BNC
21 = VIDEO
22 = S-VIDEO
31 = HDMI 1
32 = HDMI 2
AVMT Mute control 30 = Video and audio mute
disable
AVMT? Inquiry about the mute
state
31 = Video and audio mute enable
ERST? Inquiry about the error
state
1st byte: Fan error, 0 or 2
2nd byte: Lamp error, 0 to 2
3rd byte: Temperature error, 0 or 2
4th byte: Cover open error, 0 or 2
5th byte: Filter error, 0 or 2
6th byte: Other error, 0 or 2
0 to 2 mean as follows:
0 = No error detected, 1 =
Warning, 2 = Error
LAMP? Inquiry about the lamp
state
1st value (1 to 5 digits):
Cumulative LAMP operating time
(This item shows a lamp operating
time (hour) calculated based on
that LAMP MODE is LOW.)
2nd value: 0 = Lamp off, 1 = Lamp
on
INST? Inquiry about the
available inputs
The following value is returned.
“11 12 21 22 31 32”
NAME? Inquiry about the
projector name
The projector name set on
the NETWORK menu or the
ProjectorView
Setup window is returned
INF1? Inquiry about the
manufacturer name
“Optoma” is returned.
BemærkBemærk
Denne projektor
er fuldt ud i
overensstemmelse med
specikationerne for
JBMIA PJLink™ klasse
1. Den understøtter
alle kommandoerne,
der er deneret under
PJLink™ klasse 1,
og den er blevet
kontrolleret med
standard PJLink™
specikationerne,
version 1.0.