Operation Manual
50
User Controls
Auto Power O (min)
Set the Auto Power O interval. The projector powers o the lamp
after 30 minutes of no signal by default. The following warning is
displayed 60 seconds before power o.
Sleep Timer (min)
Set the Sleep Timer interval. The projector powers o after the
specied time period of inactivity (regardless of signal). The
following warning is displayed 60 seconds before power o.
Power Mode (Standby)
Eco.: Choose “Eco.” to save power dissipation further < 0.5W.
Active: Choose “Active” to return to normal standby and the
VGA out port will be enabled.
Quick Resume
If Quick Resume is On, the projector can resume operating soon
provided the projector is turned back on within 100 seconds of
being turned o.
OSD Time-Out
Set the OSD display time
Note
Note
When Power
Mode(Standby) is set to
Eco., the VGA & Audio
pass-through and RJ45
would be deactivated.
Limited functionality
is available on RS232
control.
Note
Note
Projector won’t really
be 100% turn o unless
end-user wait 100sec.