Use and Care Manual
English
14
SETUP AND INSTALLATION
Installing the projector
Your projector is designed to be installed in one of four possible positions.
Your room layout or personal preference will dictate which installation location you select. Take into consideration
the size and position of your screen, the location of a suitable power outlet, as well as the location and distance
between the projector and the rest of your equipment.
Table mount front Ceiling mount front
Table mount rear Ceiling mount rear
Projector should be placed ξat on a surface and 90 degrees / perpendicular to the to the screen.
How to determine projector location for a given screen size, please refer to the distance table on ξ
pages 69-72.
How to determine screen size for a given distance, please refer to the distance table on pages ξ 69-72.
The further away the projector is placed from the screen the projected image size increases and vertical Note:
offset also increases proportionally.
Important!
Do not operate the projector in any orientation other than table top or ceiling mount. The projector should be
horizontal and not tilted either forwards/backwards or left/right. Any other orientation will invalidate the warranty and
may shorten the lifetime of the projector lamp or the projector itself. For none standard installation advise please
contact Optoma.