Use and Care Manual
English
22
USING THE PROJECTOR
Menu navigation and features
The projector has multilingual on-screen display menus that allow you to make image adjustments and change a
variety of settings. The projector will automatically detect the source.
To open the OSD menu, press "Menu" on the projector keypad or the remote control.1.
When OSD is displayed, use 2. keys to select any item in the main menu. While making a selection
on a particular page, press or "Enter" key to enter sub menu.
Use 3. keys to select the desired item in the sub menu and then press or "Enter" key to view
further settings. Adjust the settings by using keys.
Select the next item to be adjusted in the sub menu and adjust as described above.4.
Press "Enter" or "Menu" to conrm, and the screen will return to the main menu.5.
To exit, press "Menu" again. The OSD menu will close and the projector will automatically save the 6.
new settings.
Display Mode
Brightness
Contrast
Sharpness
Color
Tint
Advanced
Presentation
IMAGE
Sub Menu
Settings
Main Menu