Use and Care Manual
English
59
USING THE PROJECTOR
Options lamp settings menu
Lamp Hour
OPTIONS
Exit
On
Lamp Settings
Lamp Reminder
Lamp Mode
Lamp Reset
Bright
Lamp Hour
Display the projection time.
Lamp Reminder
Choose this function to show or to hide the warning message when the changing lamp message is displayed.
The message will appear 30 hours before suggested replacement of lamp.
Lamp Mode
Set the lamp mode setting.
Bright: Choose "Bright" to increase the brightness.
Eco: Choose "Eco" to dim the projector lamp which will lower power consumption and extend the lamp
life.
Dynamic: Choose “Dynamic” to dim the lamp power which will be based on brightness level of the
content and adjust lamp power consumption between 100% and 30% dynamically. The lamp life will
be extended.
Eco+: When Eco+ mode is activated, the brightness level of the content is automatically detected to
signicantly reduced lamp power consumption (up to 70%) during periods of inactivity.
Note:
When ambient temperature is over 40°C during operation, the projector will switch to Eco mode
automatically.
The “Lamp Mode” can be independently set for 2D and 3D.
Lamp Reset
Resets the lamp hour counter after replacing the lamp.
Exit
Choose "Exit" to exit the menu.