Operation Manual
Table Of Contents
- SAFETY
- INTRODUCTION
- SETUP AND INSTALLATION
- USING THE PROJECTOR
- Powering on / off the projector
- Selecting an input source
- Menu navigation and features
- OSD Menu tree
- Image menu
- Image Advanced menu
- Image advanced signal (RGB) menu
- Image advanced signal (video) menu
- Display menu
- Display 3D menu
- Setup menu
- Setup Audio Settings menu
- Setup Security menu
- Setup network LAN settings menu
- Setup network control settings menu
- Setup network control settings menu
- Setup advanced menu
- Options menu
- Options menu
- Options menu
- Options lamp settings menu
- Options remote settings menu
- Options advanced menu
- Options optional filter settings menu
- 3D Setup
- maintenance
- additional information
English
31
USING THE PROJECTOR
Image Advanced menu
Noise Reduction
IMAGE
Exit
Advanced
BrilliantColor
Dynamic Black
Off
Gamma
Color Temp.
Film
Warm
Color Space
Auto
RGB Gain/Bias
Color Matching
Signal
Noise Reduction
Selects a lter sensitivity to noise. A higher value may improve noisy sources, but it will soften the image.
Press the to decrease the noise in the image.
Press the to increase the noise in the image.
BrilliantColor
TM
This adjustable item utilizes a new color-processing algorithm and enhancements to enable higher brightness while
providing true, more vibrant colors in picture.
Press the to stronger enhance the image.
Press the to less enhance the image.
Dynamic Black
Dynamic Black enables the projector to automatically optimize the brightness of the display during dark/light movie
scenes to be shown in incredible detail.
Gamma
This allows you to set up gamma curve type. After the initial setup and ne tuning is completed, utilize the Gamma
Adjustment steps to optimize your image output.
Film: for home theater.
Graphics: for PC / Photo source.
1.8 / 2.0 / 2.2 / 2.6: for specic PC / Photo source.
Blackboard: This mode should be selected to achieve optimum color settings when projecting onto a
blackboard (green).
DICOM SIM.: This mode can project a monochrome medical image such as an X ray radiography,
MRI, etc.
Press the or to select the mode.
Color Temp.
Press the or to select a color temperature from Warm, Standard, Cool and Cold.