Operation Manual

English
43
USING THE PROJECTOR
Setup Security menu
Security
SETUP
Exit
Off
Security
Security Timer
Change Password
Security
On: Choose "On" to use security verication when the turning on the projector. 
Off: Choose "Off" to be able to switch on the projector without password verication. 
Security Timer
Can be select the time (Month/Day/Hour) function to set the number of hours the projector can be used. Once this
time has elapsed you will be requested to enter your password again.
Month
Exit
Security Timer
Day
Hour
Change Password
First time  :
Press "Enter" key to set the password.1.
The password has to be 4 digits. 2.
Use number button on the remote or on-screen numeric keypad to enter your new password and then 3.
press "Enter" key to conrm your password.
Change Password  :
(If your remote does not have a number keypad, please use the up/down arrows to change each digit
of the password, then press enter to conrm)
Press "Enter" to input old password.1.
Use number button or on-screen numeric keypad to enter current password and then press "Enter" to 2.
conrm.
Enter new password (4 digits in length) using the number buttons on the remote, then press "Enter" to 3.
conrm.
Enter new password again and press "Enter" to conrm.4.
If the incorrect password is entered 3 times, the projector will automatically shut down.
If you have forgotten your password, please contact your local ofce for support.