Operation Manual
Table Of Contents
- SAFETY
- INTRODUCTION
- SETUP AND INSTALLATION
- USING THE PROJECTOR
- Powering on / off the projector
- Selecting an input source
- Menu navigation and features
- OSD Menu tree
- Image menu
- Image Advanced menu
- Image advanced signal (RGB) menu
- Image advanced signal (video) menu
- Display menu
- Display 3D menu
- Setup menu
- Setup Audio Settings menu
- Setup Security menu
- Setup network LAN settings menu
- Setup network control settings menu
- Setup network control settings menu
- Setup advanced menu
- Options menu
- Options menu
- Options menu
- Options lamp settings menu
- Options remote settings menu
- Options advanced menu
- Options optional filter settings menu
- 3D Setup
- maintenance
- additional information
English
45
USING THE PROJECTOR
Setup network LAN settings menu
Network Status
SETUP
Exit
Network : LAN Settings
Off
Connected
MAC Address
DHCP
IP Address
Subnet Mask
Gateway
DNS
Network Status
Display the network connection status (read-only).
MAC Address
Display the MAC address (read-only).
DHCP
On: Projector will obtain an IP address automatically from your network.
Off: To assign IP, Subnet Mask, Gateway and DNS conguration manually.
Exiting OSD will automatically apply the entered values.Note:
IP Address
Display the IP address.
Subnet Mask
Display subnet mask number.
Gateway
Display the default gateway of the network connected to the projector.
DNS
Display DNS number.
Exit
Choose "Exit" to exit the menu.