Operation Manual
English
32
USING THE PROJECTOR
Brightness
Adjust the brightness of the image.
Contrast
The contrast controls the degree of difference between the lightest and darkest parts of the picture.
Sharpness
Adjust the sharpness of the image.
Color
Adjust a video image from black and white to fully saturated color.
Tint
Adjust the color balance of red and green.
Phase
Synchronize the signal timing of the display with the graphic card. If the image appears to be unstable or ickers,
use this function to correct it.
Frequency
Change the display data frequency to match the frequency of your computer’s graphic card. Use this function only
if the image appears ickering vertical lines.
Horz Position
Move the image right or left within the area of available pixels.
Vert Position
Move the image up or down within the area of available pixels.
Auto Image
Force the projector to reacquire and lock to the input signal. This is useful when signal quality is marginal.
3D Display
Congure the 3D display settings. Refer to “3D Display menu” on page 33.
Color Matching
Congure the color matching settings. Refer to “Color Matching menu” on page 34.
Advanced
Congure the advanced image settings. Refer to “Advanced menu” on page 36.