Operation Manual

English
33
USING THE PROJECTOR
3D Display menu
3D Enable
3D Invert
DLP Link
PICTURE
OUTPUT
SETUP
OPTION
3D Display
Auto
Off
On
3D Enable
Set 3D format. Supports Mandatory 3D formats and frame sequential 3D@120Hz.
 Auto: When a 3D identication signal is detected, the 3D format is selected automatically.
 Frame Packing: Display 3D signal in “Frame Packing” format.
 Side by Side: Display 3D signal in “Side by Side” format.
 Top and Bottom: Display 3D signal in “Top and Bottom” format.
 Frame Sequential: Display 3D signal in “Frame Sequential” format.
 Off: Disable the function.
3D Invert
Choose to enable or disable inverting 3D sync signal for the application of using single projector.
 On: Invert the left and right frame contents.
 Off: Display the default frame contents.
DLP Link
Select 3D Sync source.
 On: 3D Sync type is DLP Link.
 Off: 3D Sync source is from the 3D Sync OUT connector.