Operation Manual

English
37
USING THE PROJECTOR
DynamicBlack™
Dynamic Black enables the projector to automatically optimize the brightness of the display during dark / light
movie scenes to be shown in incredible detail.
Noise Reduction
Select a lter sensitivity to be applied on noise. A higher value may improve noisy sources, but it will soften the
image.
Flesh Tone Correction
Control the amount of esh tone correction applied to the image.
Video Black Level
Analyze the current input image and calculate an offset value which is then added to the analog to digital converter
black level value. This ensures optimum black level for each analog source.
Film Mode
Control lm mode detection and determine whether the original source of the input video was lm or video.
Note: This function is available for interlaced video signals.