Operation Manual
English
49
USING THE PROJECTOR
5. Click “Properties”.
6. Type in the IP address and Subnet mask, then press “OK”. In this example, the PC IP address is
10.10.10.99, and the projector IP address is 10.10.10.10.
7. Press the “Menu” button on the projector.
8. Select SETUP > Communications > LAN.
9. Enter the following connection parameters:
± DHCP: Off
± IP Address: 10.10.10.10
± Subnet Mask: 255.255.255.0
± Default Gateway: 0.0.0.0
10. Press “Apply” to conrm settings.
11. Open a web browser, for example Microsoft Internet Explorer with Adobe Flash Player 9.0 or higher
installed.
12. In the Address bar, input the projector’s IP address: 10.10.10.10.