Operation Manual
Table Of Contents
- SAFETY
- INTRODUCTION
- SETUP AND INSTALLATION
- USING THE PROJECTOR
- Powering on / off the projector
- Selecting an input source
- Menu navigation and features
- OSD Menu tree
- Image menu
- Image Advanced menu
- Image advanced signal (RGB) menu
- Image advanced signal (video) menu
- Display menu
- Display 3D menu
- Setup menu
- Setup Audio Settings menu
- Setup Security menu
- Setup network LAN settings menu
- Setup network control settings menu
- Setup network control settings menu
- Setup advanced menu
- Options menu
- Options menu
- Options menu
- Options lamp settings menu
- Options remote settings menu
- Options advanced menu
- Options optional filter settings menu
- 3D Setup
- maintenance
- additional information

English
23
USING THE PROJECTOR
Main menu Sub menu Advanced menu Single-item menu Value
Image
Advanced
Color Matching
Red Hue/Saturation/Gain [-50~50]
Green
Hue/Saturation/Gain
[-50~50]
Blue
Hue/Saturation/Gain
[-50~50]
Cyan
Hue/Saturation/Gain
[-50~50]
Magenta
Hue/Saturation/Gain
[-50~50]
Yellow
Hue/Saturation/Gain
[-50~50]
White Red/Green/Blue
Reset
Exit
Signal (RGB)
Automatic On / Off
Phase 0~31
Frequency -5~5
H. Position -5~5
V. Position -5~5
Exit
Signal (Video)
White Level 0~31
Black Level -5~5
IRE 0/7.5 (NTSC only)
Exit
Exit
Reset
Display
Format
WXGA/WUXGA:
4:3, 16:9 or 16:10,
LBX , Native, Auto
1080p: 4:3, 16:9, LBX,
Native, Auto
Zoom
Edge Mask H
Right/Left(Icon in
center)
-100~+100
Image Shift V
Up/Down (Icon in
center)
-100 ~ +100
Geometric
Correction
H. Keystone -30 ~ +30
V. Keystone -30 ~ +30
Auto V. Keystone
On
Default [Off]
Off
Four Corners
Top-Left
Top-Right
Bottom-Left