Operation Manual

English
33
USING THE PROJECTOR
Image advanced signal (RGB) menu
Automatic
IMAGE
Exit
Advanced : Signal
Phase
On
Frequency
H. Position
V. Position
Note:
“Signal” is only supported in Analog VGA (RGB) signal. 
If “Signal” is automatic, the phase, frequency items are grayed out. If “Signal” is not automatic, the 
phase, frequency items will appear for the user to manually tune and are saved in the settings after
that for the next time projector is turned off and on again.
Automatic
Automatically selects the signal. If you use this function, the Phase, frequency items are grayed out, and if Signal is
not automatic, the phase, frequency items will appear for user to manually tune and saved in settings after that for
next time projector turns off and on again.
Phase
Synchronize the signal timing of the display with the graphic card. If the image appears to be unstable or ickers,
use this function to correct it.
Frequency
Change the display data frequency to match the frequency of your computer's graphic card. Use this function only if
the image appears to icker vertically.
H. Position
Press the  to move the image left.
Press the  to move the image right.
V. Position
Press the  to move the image down.
Press the  to move the image up.
Exit
Choose "Exit" to exit the menu.