Operation Manual

English
53
USING THE PROJECTOR
Specication for "RS232 by TELNET":
Telnet: TCP.1.
Telnet port: 23 (for more detail, kindly please get contact with the service agent or team).2.
Telnet utility: Windows "TELNET.exe" (console mode).3.
Disconnection for RS232-by-Telnet control normally: Close4.
Windows Telnet utility directly after TELNET connection ready.5.
Limitation 1 for Telnet-Control: there is less than 50 bytes for successive network payload for ±
Telnet-Control application.
Limitation 2 for Telnet-Control: there is less than 26 bytes for one complete RS232 command for ±
Telnet-Control.
Limitation 3 for Telnet-Control: Minimum delay for next RS232 command must be more than 200 ±
(ms).