Operation Manual

English
58
USING THE PROJECTOR
Options lamp settings menu
Lamp Hours
OPTIONS
Exit
On
Lamp Settings
Lamp Reminder
Lamp Mode
Power
Lamp Reset
Bright
Lamp Hours
Display the projection time.
Lamp Reminder
Choose this function to show or to hide the warning message when the changing lamp message is displayed.
The message will appear 30 hours before suggested replacement of lamp.
Lamp Mode
Bright:  Choose "Bright" to increase the brightness.
Eco.:  Choose "Eco." to dim the projector lamp which will lower power consumption and extend the
lamp life.
Power: Choose this option if you want to set the projector power setting manually. 
Note:
When ambient temperature is over  40°C in operating, the projector will switch to Eco automatically.
“Lamp Mode” can be independently set for 2D and 3D. 
Power
Set the projector power manually. The available options include 365W, 350W, 330W, 310W, 300W, and 280W.
Lamp Reset
Resets the lamp hour counter after replacing the lamp.
Exit
Choose "Exit" to exit the menu.