Operation Manual
Table Of Contents
- SAFETY
- INTRODUCTION
- SETUP AND INSTALLATION
- USING THE PROJECTOR
- Powering on / off the projector
- Selecting an input source
- Menu navigation and features
- OSD Menu tree
- Image menu
- Image Advanced menu
- Image advanced signal (RGB) menu
- Image advanced signal (video) menu
- Display menu
- Display 3D menu
- Setup menu
- Setup Audio Settings menu
- Setup Security menu
- Setup network LAN settings menu
- Setup network control settings menu
- Setup network control settings menu
- Setup advanced menu
- Options menu
- Options menu
- Options menu
- Options lamp settings menu
- Options remote settings menu
- Options advanced menu
- Options optional filter settings menu
- 3D Setup
- maintenance
- additional information
English
60
USING THE PROJECTOR
IR Function
On: Choose "On", the projector can be operated by the remote control from front or top IR receiver.
Front: Choose "Front", the projector can be operated by the remote control from front IR receiver.
Top: Choose "Top", the projector can be operated by the remote control from top IR receiver.
Off: Choose "Off", the projector can't be operated by the remote control from front or top IR receiver.
By selecting "Off", you will be able to use the Keypad keys.
Note:
“Front” and “Top” cannot be selected in standby mode.
IR mode can be switched to “NVIDIA 3D Vision” once implemented and veried by NVIDIA.
Remote Code
Press to set Remote custom code and press "Enter" to change to the setting.