Operation Manual

English
61
USING THE PROJECTOR
Options advanced menu
Exit
Off
Direct Power On
OPTIONS
Advanced
Signal Power On
Auto Power Off (min)
Sleep Timer (min)
Quick Resume
Power Mode (Standby)
Active
Off
Direct Power On
Choose "On" to activate Direct Power mode. The projector will automatically power on when AC power is supplied,
without pressing the " " key on the projector Control Panel or on the remote control.
Signal Power On
Choose "On" to activate Signal Power mode. The projector will automatically power on when a signal is detected,
without pressing the " " key on the projector Control Panel or on the remote control.
Auto Power Off (min)
Sets the countdown timer interval. The countdown timer will start, when there is no signal being sent to the
projector. The projector will automatically power off when the countdown has nished (in minutes).
Press the  to decrease the timer interval.
Press the  to increase the timer interval.
Note:
The value of sleep timer will be reset to zero after the projector is powered off. 
The projector will automatically power off when the countdown has nished. The default setting is 20 minutes. 
Sleep Timer (min)
Sets the countdown timer interval. The countdown timer will start, with or without a signal being sent to the
projector. The projector will automatically power off when the countdown has nished (in minutes).
Press the  to decrease the timer interval.
Press the  to increase the timer interval.
Quick Resume
On: If the projector is accidentally turned off, this feature allows the projector to be instantly powered 
on again, if selected within a period of 100 seconds.
Off: The fan will start cooling the system after 10 seconds when user turns off the projector. 
Power Mode (Standby)
Active: Choose "Active" to return to normal standby. 
Eco.: Choose "Eco." to save power dissipation further < 0.5W. 
Exit
Choose "Exit" to exit the menu.