Operation Manual

English
66
MAINTENANCE
Installing and cleaning the dust lter
Installing the dust lter
Dust lters are only required/supplied in the selected regions with excessive dust.Note:
Cleaning the dust lter
We recommends cleaning the dust lter every three months; clean it more often if the projector is used in a dusty
environment.
Procedure:
Switch off the power to the projector by pressing 1. the " " button on the remote control or on the Keypad of the
projector.
Disconnect the power cord.2.
Remove the dust lter slowly and carefully.3.
Clean or replace the dust lter.4.
To install the dust lter, reverse the previous steps.5.
1
2