Operation Manual
Table Of Contents
- SAFETY
- INTRODUCTION
- SETUP AND INSTALLATION
- USING THE PROJECTOR
- Powering on / off the projector
- Selecting an input source
- Menu navigation and features
- OSD Menu tree
- Image menu
- Image Advanced menu
- Image advanced signal (RGB) menu
- Image advanced signal (video) menu
- Display menu
- Display 3D menu
- Setup menu
- Setup Audio Settings menu
- Setup Security menu
- Setup network LAN settings menu
- Setup network control settings menu
- Setup network control settings menu
- Setup advanced menu
- Options menu
- Options menu
- Options menu
- Options lamp settings menu
- Options remote settings menu
- Options advanced menu
- Options optional filter settings menu
- 3D Setup
- maintenance
- additional information
English
86
ADDITIONAL INFORMATION
Key Key code
Printing-key
denition
Description
Mouse right
click
CC R Use as mouse right click when mouse is switched on.
ENTER C5 Enter Conrm your item selection.
Info. 25 Info. Display projector information.
Laser N/A Laser Use as laser pointer.
Re-Sync
Re-
Sync
4 Re-Sync
Automatically synchronize the projector to the input
source.
Source Source 18 Source Press "Source" to select an input signal.
Volume
9 Volume +
Press to increase the volume.
0C Volume -
Press to decrease the volume.
Menu Menu 88 Menu
Press "Menu" to launch the on-screen display (OSD)
menu. To exit OSD, Press "Menu" again.
V Keystone + 85 V Keystone +
Use to adjust image distortion caused by tilting the
projector.
Page Up 0A Page + Use to navigate page up.
V Keystone - 84 V Keystone -
Use to adjust image distortion caused by tilting the
projector.
Page Down 0D Page - Use to navigate page down.
Format 15 Format Press to choose the projector format.
Zoom 61 Zoom Zoom in/out the projected image.
Remote
ID
3201~
3299
Press until Power LED is ashing then press 01~99 to set
the particular remote code.
ALL 32CD Press to set remote code to all.
VGA1 / 1 8E 1/VGA1
Press to choose VGA source.
Use as numeric keypad number "1".
S-Video / 2 1D 2/S-Video
Press to choose S-video source.
Use as numeric keypad number "2".
HDMI1 / 3 16 3/HDMI1
Press to choose HDMI source.
Use as numeric keypad number "3".
HDMI2 9B HDMI2 Press to choose HDMI source.
VGA2 / 4 9A 4/VGA2
Press to choose VGA2 source.
Use as numeric keypad number "4".
Video / 5 1C 5/Video
Press to choose composite video source.
Use as numeric keypad number "5".
DVI / 6 19 6/DVI
Press to choose DVI source.
Use as numeric keypad number "6".
BNC / 7 1A 7/BNC
Press to choose BNC source.
Use as numeric keypad number "7".
YPbPr / 8 17 8/YPbPr
Press to choose component video source.
Use as numeric keypad number "8".
Display Port / 9 9F 9/DisplayPort
Press to choose Display port.
Use as numeric keypad number "9".
3D / 0 89 0/3D
Press to choose 3D source.
Use as numeric keypad number "0".