Operation Manual
Table Of Contents
- SAFETY
- INTRODUCTION
- SETUP AND INSTALLATION
- USING THE PROJECTOR
- Powering on / off the projector
- Selecting an input source
- Menu navigation and features
- OSD Menu tree
- Image menu
- Image Advanced menu
- Image advanced signal (RGB) menu
- Image advanced signal (video) menu
- Display menu
- Display 3D menu
- Setup menu
- Setup Audio Settings menu
- Setup Security menu
- Setup network LAN settings menu
- Setup network control settings menu
- Setup network control settings menu
- Setup advanced menu
- Options menu
- Options menu
- Options menu
- Options lamp settings menu
- Options remote settings menu
- Options advanced menu
- Options optional filter settings menu
- 3D Setup
- maintenance
- additional information
English
87
ADDITIONAL INFORMATION
Note:
If the projector supports Dynamic Eco / Image Care features and AV Mute is pressed, the power
consumption of the lamp becomes 30%.
Remote mouse feature simulation specication
The remote mouse feature is supported only when a computer source is selected, for example VGA or
HDMI.
If you press the “Switch” key on the remote control, you will see the cursor being displayed on the right
top corner of the screen for 15 seconds.
In remote mouse mode the cursor should move smoothly and continuously on the screen.
If you press the “Switch” key on the remote control, the V keystone will switch to page up/ page down
mode.