Operation Manual

67
English
Appendices
Installing and Cleaning the Dust
Filter
Dust lters are
only required/sup-
plied in selected
regions with
excessive dust.
Cleaning the Dust Filter
We recommends cleaning the dust lter every three
months; clean it more often if the projector is used in a
dusty environment.
Procedure:
Switch off the power to the projector by pressing 1. the “ ” button on
the remote control or on the Keypad of the projector.
Disconnect the power cord.2.
Remove the dust lter slowly and carefully.3.
Clean or replace the dust lter.4.
To install the dust lter, reverse the previous steps.5.
1
2
Installing the Dust Filter