Operation Manual
English
61
ADDITIONAL INFORMATION
Warning indicators
LED status indicators
The LED status indicators are located on the rear of the projector. Each LED is dened below.
LED Type LED Status Projector State
Light LED
Off Laser diode is off
Solid Orange Laser diode time has expired
Solid Green Laser diode is on and operating correctly
Flashing Red When projector has lost over 60% initial luminance
Status LED
Off AC power is off (without AC plug in)
Off
AC has been applied, projector is in standby mode
Note: Status LED cannot be ashing red, as this is reserved for
an error condition. Status LED is off but keypad LED will indicate
Standby Mode.
Solid Green Projector is powered up and operating normally
Flashing Green Projector communications
Flashing Orange Projector is in cool down mode or startup mode
Flashing (alternating)
Green/Orange
Projector is in ash update state
Solid Red Over temperature and projector will automatically shut down
Flashing Red Fan failure and projector will automatically shut down
AV Mute
Solid Green Light is on - image is displayed
Solid Orange Light is on - image is blank
Power off:
Powering Off...
Press OFF key to Conrm
Light power impact due to high ambient temperature:
The light power will be reduced
due to the high ambient temperature.
DMD life time impact due to high ambient temperature:
Running the projector at high ambient temperature
will impact DMD life time.