User`s manual

100
English
Appendices
No image appears on-screen
► Ensure all the cables and power connections are correctly and
securely connected as described in the “Installation” section.
► Ensure all the pins of the connectors are not bent or broken.
► Make sure the projector is turned on.
► Ensure that the “AV mute” feature is not turned on.
Partial, scrolling or incorrectly displayed image
► Press on the control panel or Re-Sync on the remote control.
► If you are using a PC:
For Windows 95, 98, 2000, XP, Windows 7:
1. Open “My Computer”, the “Control Panel” folder, and then
double click on the “Display” icon.
2. Select the “Settings” tab.
3. Verify that your display resolution setting is lower than or equal
to UXGA (1600 × 1200).
4. Click on the “Advanced Properties” button.
If the projector is still not projecting the whole image, you need to
change the monitor display you are using. Refer to the following
steps.
1. Verify the resolution setting is lower than or equal to UXGA
(1600 × 1200).
2. Select the “Change” button under the “Monitor” tab.
3. Click on “Show all devices”. Next, select “Standard monitor
types” under the SP box; choose the resolution mode you need
under the “Models” box.
Troubleshooting
If you experience a problem with your projector,
refer to the following information. If a problem
persists, contact your local reseller or service
center.