User`s manual

English

Adjusting the Settings

SETUP | Signal

Automatic

Automatically selects the signal. If you use this function,

Phase and the frequency items are grayed out. If Signal is

not automatic, Phase and the frequency items are enabled

for user to manually set the settings. Signal settings will

take effect the next time the projector is powered on.

Phase

Synchronize the signal timing of the display with the

graphic card. If the image appears to be unstable or

ickers, use this function to correct it.

Frequency

Change the display data frequency to match the frequency

of your computer’s graphic card. Use this function only if

the image appears to icker vertically.

H. Position

► Press the to move the image left.

► Press the to move the image right.

V. Position

► Press the to move the image down.

► Press the to move the image up.

“Signal” is only

supported in

Analog VGA

(RGB) signal.