User`s manual

42
English
Adjusting the Settings
SETUP | Network
Network State
Display the network connection status. When connected,
you can access and control the projector through a web
browser.
DHCP
Use this function to set the projector network connection.
► On: Automatically assign an IP address to the projector
from a DHCP server.
► Off: Assign an IP address manually.
IP Address
If DHCP is “Off”, use this function to enter an IP address.
Press
or to move between elds and press or to
adjust the value.
Subnet Mask
If DHCP is “Off”, enter the subnet mask number. Press or
to move between elds and press or to adjust the
value.
Gateway
If DHCP is “Off”, enter the default gateway of the network
connection. Press
or to move between elds and press
or to adjust the value.
When IP settings
are changed,
multimedia
modules (including
USB Display,
Network Display
and Flash Drive
functions) will
restart, and the
process will take
60~90 seconds.