User`s manual

46
English
Adjusting the Settings
OPTIONS |
Advanced
Direct Power On
Choose “On” to activate Direct Power mode. The projector
automatically turns on once the AC power is connected to
the power source even without pressing the “ ” key.
Auto Power Off (min)
Use this function to set the countdown timer (in minutes) to
automatically turn off the projector when no source signal is
received.
Sleep Timer (min)
Use this function to set the countdown timer to
automatically turn off the projector. When the timer elapsed,
the projector automatically turns off regardless of receiving
or not receiving any signal.
Power Mode (Standby)
► ECO: Choose “ECO” to save power dissipation > 0.5W.
► Active: Choose “Active” to return to normal standby
mode.
Brightness Mode
► BRIGHT: Choose “BRIGHT” to increase brightness.
► ECO: Choose “ECO” to dim the projector light which in
turn lowers power consumption with lower noise level.
► Image AI: Choose "Image AI" to automatically detect
the contrast ratio of the displayed image.
When Power mode
(Standby) is set to
Eco (> 0.5W), the
VGA output, Audio
pass-through
and RJ45 are
deactivated.