User`s manual

66
English
Network Display
Network Display mode
The IP address
generated by the
projector varies
depending on your
local area network
connection
settings.
In Network Display mode, the projector supports remote
projection from computers, tablets, and mobile phones when
connected to an Ethernet or wireless network. Alternatively,
you can control the computer remotely through the projector.
You can connect to the Optoma Web Utility page for
conference projection using a web browser or download the
Optoma Presenter Software for wireless projection right on
your computer desktop.
You can also control and adjust the projection settings using
the Crestron RoomView.
Activating Network Display Mode
1. Connect to the network (see “Connect to Network” on page
16).
2. The projector automatically detects the connection. If not,
repeatedly press on the control panel or the Source
key on the remote control to switch the input source.
3. Once the projector detects the connection, the Network
Display screen appears.
LOGIN CODE:
Server IP: 192.168.100.10
Resolution: 1024x768
Version: 0.0.1.2
SSID:
Network Display
Channel: 8
Security: OFF
7272
Optoma Presentation System
Optoma Presentation System
Quick Guide
Quick Guide
Quick Guide
1. Make sure your WLAN is enabled, and connect to Optoma Presentation System.
2. Open your browser, or enter the IP address (refer to below server IP address)
3. Click on "Download", and execute the installation program.
4. Make sure your personal firewall allows OPS software to pass through!
5. Enter the LOGIN CODE to start projection!
4. Take note of the Login Code and IP Address. You will
need them to connect to Optoma Web Utility page (see
“Open Optoma Web Utility” on page 67).