User's Manual

a
d
c
b
0504
Your model 01 arrives with the battery
attached. The first time you use the model 01,
you must connect the power supply in order
to power the computer and charge the battery.
Connect the power supply to the model 01 as
shown at right, then plug it into an outlet.
The battery is charging whenever the
computer is connected to an outlet through
the power supply, regardless of whether the
computer is turned on or off. The battery fuel
gauge is located on the back of the battery.
While the model 01 is charging, the battery
fuel gauge lights flash in sequence.
When the battery is not charging, the battery
fuel gauge lights are unlit. To check the
battery power level, push the battery fuel
gauge button on the back of the battery.
part 2
powering up
During normal use, the fully-charged battery
can provide about three hours of operating
time. (For more information about maximizing
battery life, see
http://www.oqo.com/support/batterylife).
To turn on your model 01, press the power
button. The first time you do this, you must
set up Windows XP. See the
Start Here guide
for Windows XP, included with your computer.
a Power supply
b Battery
c Battery fuel gauge button
d Power button
powering up