User's Manual

0908

Use the digital pen like this:

• To select an object on the screen, touch it with

the tip of the pen.

• To drag an object, hold the pen over it and drag

across the screen. To drop the object, lift the

pen.

• To double-click an object, tap it twice.

• To right-click an object, select it and click the

button located on the digital pen.

Use the “Wacom Pen Settings” applet found in the

Control Panel to change this behavior and calibrate

the pen. It is important to calibrate your pen before

you start to use it. Use only light pressure with

the pen. The angle of the pen will affect its

behavior. More information on the pen can be

found at http:/www.oqo.com/support.

a Thumbwheel

b Digital pen

c Tap to select

d Pen (right-click) button

e Audio in/out

part 4

using the digital pen

and thumbwheel

The thumbwheel can be used in multiple

modes. Use the OQO Settings applet found

in the Control Panel to change its behavior.

By default, the thumbwheel works like this:

• Click the thumbwheel once to display the

current mode, then click again to toggle

among the modes.

• Double-click the thumbwheel to toggle

between open applications or launch new

applications.

• In volume mode, rotate the wheel to the left

to decrease the volume and to the right to

increase it.

• In vertical scrolling mode, rotate the wheel

to the left to scroll up and to the right to

scroll down.

• In horizontal scrolling mode, rotate the

wheel to the left to scroll left and to the

right to scroll right.

Remove the digital pen by pulling it out of the

slot in the upper right corner of the OQO.

more inputs