User's Manual

a
d
c
b
e
f
1110
When using the model 01 as a desktop
computer, place it on the desktop stand to
hold it in a convenient, upright position.
The docking cable attaches to your model 01
as shown at right. When removing the docking
cable from the docking connector, keep the
cable straight, as twisting or angling it can
damage the connector. It includes multiple
ports that can be used simultaneously to
connect a variety of peripheral devices:
• Use the VGA port to connect to an external
monitor or projector. Resolutions up to
1280 x 1024 are supported. To change the
resolution of your external monitor or
projector, go to the “Display” applet in the
Control Panel and select the “Settings” tab.
The model 01 will remember the settings
and automatically adjust the screen
resolution when you dock and undock.
• Use the Ethernet port to connect to a Local
Area Network (LAN).
• Use the USB 1.1 port to connect to USB-
enabled devices, such as a keyboard or a
scanner. Use a USB hub to connect multiple
devices. A powered US B hub is recommended.
• Use the FireWire
®
(IEEE 1394) port to
connect to FireWire-enabled devices such as a
hard drive or camera.
• Use the audio out port to connect to
headphones or external speakers. An
additional audio out port is located on the
body of the computer.
• Use the DC power port to connect the power
supply to the cable. The power supply cannot
connect directly to the computer while the
docking cable is in use.
a FireWire port
b Power supply in
c USB port
d Audio out
e Ethernet port
f VGA out
part 5
using the docking
cable and desktop
stand
docking