User Guide Part 1

removing and attaching the battery
On the model 02, a fully charged battery typically provides 2 to
3 hours of operating time depending on usage. Double capacity
batteries that provide up to 6 hours of charge are also available
at http://www.oqo.com/store.
charging the battery
A battery fuel gauge is located on the right side of the battery.
When pressed and released, the fuel gauge will illuminate to
indicate remaining battery power. While the battery is charging,
the fuel gauge lights flash in sequence.
A standalone battery detached from the model 02 can be
charged using a battery charging adapter (optional accessory)
with your power supply.
removing the battery
Before replacing the battery, the computer should be plugged
into an outlet, shut down, or placed in Hibernate mode.
Removal of the battery while in Standby mode may result in
loss of user and system data.
To remove the battery, press the battery release button located
next to the power button and lift the battery away from the
computer.
attaching the battery
To attach the battery, rest the battery hooks in the slots
alongside the back edge of the computer before lowering
the battery onto the computer. Press the battery against the
computer until the latch clicks.
8