User's Manual

powering up and down
Your model 02 ships with a screen protector and battery
attached.
To turn on your model 02, press the power button located on
the left side of the computer. When idle, conserve battery
power by putting your computer in Standby or Hibernate mode.
To charge the battery, connect the power supply to the model
02 as shown at right, and then plug into an outlet. The battery
will charge whenever the computer is connected to an outlet.
standby mode
Standby mode reduces the power consumption of your
computer by cutting power to non-critical hardware
components. The system maintains power to your computer’s
random access memory (RAM), which allows the system to
quickly restore your active applications and fi les.
To put your computer into Standby mode, press the power
button.
hibernate mode
Hibernate mode saves your current system state to the
hard disk drive and then powers down your computer. When
you power up again, your open fi les and applications are re-
stored just as you left them. Hibernate mode draws no power
and is best for conserving battery life and changing batteries.
To put your computer into Hibernate mode, select ‘Shut Down’
from the Start menu and choose the ‘Hibernate’ option or
press the ‘H’ key on your keyboard.
conserving battery power
Additional ways to conserve battery power include:
Turn off wireless radios when not in use.
Turn off the keyboard backlight.
Lower the internal display brightness.
Adjust power settings in the Power Options control panel.
•
•
•
•
6