User Manual

JEEP WRANGLER / RUBICON

(TJ / YJ)

JEEP UNLIMITED (TJL)

ROCK SLIDER FRONT BUMPER

FULL WIDTH HD FRONT BUMPER

INSTALLATION INSTRUCTIONS

1997-06 TJ/TJL KIT # 83664

FULL WIDTH HD FRONT BUMPER

W/ HOOP

INSTALLATION INSTRUCTIONS

1997-06 TJ/TJL KIT # 83665

WARNING

Read and understand all instructions, warnings,

cautions, and notes in this sheet and in your owner’s

manual before you install this kit.

1 83664 - 83665

Before starting installation

1. Read all warnings and instructions completely and

carefully before you begin.

2. Check to make sure the kit is complete (refer to the

Kit Parts List at the end of this document).

3. Only install this kit on the vehicle for which it is

intended. If anytime during the installation you

encounter something different from what is outlined

in the instructions, call technical

support at (928)

636-7080.

NOTE

Parts provided in this kit are prefaced by the word kit

and appear in bold font.

Kit Bumper (83664)

Kit Bumper (83665)

PAGE 1
Kit Bumper (83664) JEEP WRANGLER / RUBICON (TJ / YJ) JEEP UNLIMITED (TJL) ROCK SLIDER FRONT BUMPER FULL WIDTH HD FRONT BUMPER INSTALLATION INSTRUCTIONS 1997-06 TJ/TJL KIT # 83664 FULL WIDTH HD FRONT BUMPER W/ HOOP INSTALLATION INSTRUCTIONS 1997-06 TJ/TJL KIT # 83665 Kit Bumper (83665) Before starting installation WARNING NOTE Read and understand all instructions, warnings, cautions, and notes in this sheet and in your owner’s manual before you install this kit.
PAGE 2
Install kit 1. Stock front bumper. a. Unplug foglight harness. Kit Parts List b. Remove four torx bolts and tow hooks. Qty. 1 2 c. Remove two torx bolts from underside of bumper. d. Remove stock bumper from vehicle. 1 6 6 2. Winch. (Skip this step if not installing a winch) Description Bumper, front D-Ring, front ZH83664 Bolt, 1/2”-13 x 1 1/4” Washer, 1/2” SAE Hardend NOTE If you are installing a winch, mount the winch onto the bumper before installing bumper onto frame rails. a.