Installation & Assembly

DecoFix Extra
FX200 310ml
> min. 80m
FX210 80ml
> min. 20m
DecoFix Pro
FDP500 310ml
> 7 - 8m
FDP600 4200ml
> 65 - 110m
DecoFix Hydro
FDP700 290 ml
> 7 - 8 m
INSPIRING PROFILES
+
+
1/2
10-35°C
50-95°F
min 40%
max 70%
24 hrs
PUROTOUCH
®
- DUROPOLYMER
®
PUROTOUCH
®
- DUROPOLYMER
®
- DUROFOAM
®
PUROTOUCH
®
- DUROPOLYMER
®
PUROTOUCH
®
- DUROPOLYMER
®
03 GLUES
01 SURFACE - CEILING - WALL
02 WORKING CONDITIONS
04 INSTALLATION > see reverse
Storage & installation
conditions for Orac Decor
products & DecoFix
Place profiles & adhesives
at room temperature
24 hours before installation
Dust free Dry No grease Sand and
wash surface
Flat wall
and ceilings
• Use DecoFix Pro for porous or
DecoFix Hydro for non-porous
surfaces
• Extra attention for gluing on
wallpaper!!
• Preferably use DecoFix Hydro &
DecoFix Extra for new-build
projects
• Adhesion of paint or plaster on wall
must be perfect
• When in doubt about surface,
please contact Orac
ONLY FULL GUARANTEE WITH DECOFIX
For
Orac Basixx
use
DecoFix Pro
for joints
• Polyurethane-based glue
• Seam joints between the mouldings
• Remove excess glue before hardening (max. 1 hour and repeat after 2-3 hours)
• Clean with acetone or Synth Thinner
• Can be painted after 24 hrs
• The more humidity,
the faster the drying time
• Strong, water-based acrylic glue
• Long-lasting seal between mouldings and the wall and/or ceiling
• For interior applications and porous surfaces (not for humid spaces or outside)
• Remove with humid sponge or cloth
• Should be kept frost free
• Extra strong MS polymer glue
• For exterior applications, damp environments, non-porous surfaces (tiles, glass, ...)
• Remove with soap solution
MP036-A4 EN 01/2011
INSTALLATION OF RIGID COVING (SIMILAR FOR PANEL MOULDING, SKIRTING, BYBLOS, DOOR SURROUNDS)
INTERIOR
POROUS AND
DRY SURFACE
glueing on
wall and
ceiling
joints
EXTERIOR
NON-POROUS
HUMID SURFACE
glueing on
wall and
ceiling
joints