- Oracle Application Server Adapter for IMS/TM User's Guide
Installing Oracle Connect on an IBM OS/390 or z/OS Series Platform
6-6 Oracle Application Server Adapter for IMS/TM User’s Guide
da('nnn.TRANSMIT.LIB') [UNIT(unit) VOLUME(volume)]
This extracts the nnn.TRANSMIT.LIB library from the nnn.TRANSMIT.KIT kit
to the specified unit and volume. If a unit and volume are not specified, then the
library is extracted to the current unit and volume.
3. Run the PREPARE member of the nn.TRANSMIT.LIB library:
ex PREPARE
Follow the instructions in the Response column in Table 6–8 for each entry in the
Screen column.
The following libraries are generated:
nnn.BUILDKIT.LOAD
nnn.BUILDKIT.SRC
nnn.BUILDKIT.GENDEMO
Where nnn is the high-level qualifiers you assigned in step 1.
4. In the nnn.BUILDKIT.SRC library, run the NAVINST member:
ex NAVINST
Follow the instructions in the Response column in Table 6–9 for each entry in the
Screen column.
Table 6–8 Installation Prepare Job Prompts and Responses
Screen Response
DO YOU WANT TO USE SMS MANAGED
STORAGE FOR THIS INSTALLATION Y/N [N]:
If you want to manage the storage using SMS, then answer
Y, otherwise answer N.
ENTER THE STORCLASS FOR INSTALLATION
TEMP DATASETS [ ]:
This prompt is displayed only if SMS is used to manage the
installation (you answered Y to the first prompt).
Enter the storage class
ENTER THE UNIT NAME FOR INSTALLATION
TEMP DATASETS [3390]:
If a storage class is not specified, then enter the unit name
for temporary datasets used during the installation
procedure
ENTER THE VOLUME NAME FOR
INSTALLATION TEMP DATASETS:
This prompt is displayed only if SMS is not used to manage
the installation (you answered N to the first prompt).
The volume name for temporary datasets used during the
installation procedure
ENTER THE OUTPUT CLASS FOR
INSTALLATION OUTPUT [A] :
Enter the output class only if you do not want the default
class used (the default is A)
DO YOU WANT TO USE THE DEFAULT JOB
CARD Y/N [Y]
A job card is displayed. If you want to use a replacement
card, then it must be entered as it will appear in the job. You
can enter up to six lines. Enter a blank card to end input.
If you do not enter a card, then the Oracle Connect default
card is used.
DO YOU WANT TO PERFORM A MANUAL
(M) OR AUTOMATIC (A) INSTALLATION [A]:
If you want to review the JCL used to install Oracle Connect,
before it is submitted, then respond M for a manual
installation.
PLEASE REVIEW AND SUBMIT FOR
EXECUTION THE
HLQ.TRANSMIT.LIB(INSTJO)
This prompt is displayed only if a manual installation is
requeshen Tw[(2010006ect Tc4iew th06e)]TJ12.30.02 Tm-0.0