Manual

158
WWW.ORACLELIGHTING.COM • TEL: [phone] • FAX: [phone]
APPLICATION:
• Open office space ambient lighting for virtually glare free and
shadow free illumination.
• General office lighting with computer screens, meeting rooms, schools.
PRODUCT FEATURES:
• Designed to mount on exact 4 foot and 8 foot centers. Joiners will
accept stems, “V” cable and power cords.
• A computer designed optical system that maximizes the output of
T8 lamps while producing very wide distribution for even ceiling
brightness with mounting from 12 to 18 inches from the ceiling.
Total fixture efficiency 80.7%.
• Architectural ends. There are two die cast aluminum designs
available, “spade” and “bullnose” configurations. They are bolted
to the die cast joiners for a complete architectural look.
• Fixtures are shipped with die cast aluminum joiners installed for
suspension and structural continuity.
• Fixtures are designed with perforated section that provide limited
downlight contribution and adds a horizontal glow to the fixture
design.
FINISHES:
• White 20 gauge roll formed steel housing.
OPTIONAL FEATURES:
• Fixtures can be wired for 2 lamp operation on each 4’ section.
• Adjustable cable suspension system provides a fast installation into
a variety of interior heights, including sloped ceilings.
• NEC required ballast disconnect is standard.
LISTING - UL/ C-UL listed to US and Canadian Standards.
WARRANTY - Guaranteed for one year against mechanical defects.
MOUNTING:
Pre-drilled mounting holes come standard on every fixture for
Cable suspension system and power cord every 48” and 96”.
Suspension Air Craft Cable System with Power Feed:
Suspension with 18 gauge white SJT Power Cord For T-Bar and
Slot-T applications available with 3, 4, 5 or 6 Through Wires.
Kit includes 5” diameter canopy cover finished in matte white
and 1/16” stainless steel aircraft cable which can be adjusted
from 12” to 36”. Must ordered per run. Part # TB-SACS-SJT-3
Suspension Air Craft Cable System ( No power Feed):
Cable Assembly includes 1/16” stainless steel aircraft cable,
which can be adjusted from 12” to 36”,and matte white
canopy cover. Part # TB-SACS-NW
DIMMING:
Various dimming ballast are available upon request including
Advance Mark 10, Mark-7, Lutron ECO-10 and Lutron Hi-Lume
ballast.
Electrical:
Male and Female 18 gauge 6 wire plug connectors are included
with every fixture to allow for simple hassle free continuous
wiring. Each fixture must be installed male to female.
T5 ARCHITECTURAL SUSPENDED LINEAR
FLUORESCENT DIRECT/INDIRECT SYSTEM
Linear Fluorescent Direct/Indirect
Add 4-1/4” for
Spade Endcap
Add 3” for Bull
Nose Endcap
2” Deep
LENGTH
4’=48", 8’=96”
7-3/4”
T5
ASI1/2
Male
Female
48"
96"
4' RUN
96" 96"
96"
48"
96"
48"
96"
96"
96"
96"
Fixture Lengths & Mounting Locations
8' RUN
12' RUN
16' RUN
20' RUN
24' RUN
57”
105”
153
201”
249”
297”
Male & Female for Continuous Row Mounting
ASI1
ASI2
ASI1 ASI2
Catalog Number
Project Name
Type