User Manual

110
WWW.ORACLELIGHTING.COM • TEL: [phone] • FAX: [phone]
T8 /T5 4’ VAPOR TIGHT, IP65/IP67 WET LOCATION LUMINAIRE
(1 OR 2 LAMP, SURFACE MOUNT) IP65, IP67
OW2IP
LAMPS INSTALLED
(Blank)
L30K
L35K
L41K
L50K
- No lamps
- 3000K
- 3500K
- 4100K
- 5000K
-1 Ballast
-2 Ballasts
(Blank)
2
# OF BALLAST
(Blank)
HBF
LBF
BALLAST FACTOR
(Blank)
120
277
347
480
- MVOLT (120/277)
VOLTAGE
1
- Normal BF
- High BF
- Low BF
WIRING OPTIONS
PCSB120
- 10’ Nema 5-15R 120V Straight Blade Plug
PCSB277
- 10’ Nema 7-15R 277V Straight Blade Plug
PCTL120
- 10’ Nema L5-15R 120V Twist Lock Plug
PCTL277
- 10’ Nema L7-15R 277V Twist Lock Plug
IPTL120
- 10’ 120V IP Rated Twist lock Plug
IPTL277
- 10’ 277V IP Rated Twist lock Plug
SO1
- 10’ 120V/277V SO Cord
SO2
- 10’ 480V SO Cord
(Consult Factory for 208V, 248V, 347V and 480V wiring)
BALLAST CONFIGURATION & CODE
32W/T8 28W/T5 54W/T5HO DESCRIPTION
(Blank) - - Electronic Instant Start
EPS (Blank) (Blank) Electronic Program Start
ADV-7 - ADV-7 Advance Mark-7
1
ADV-10 - ADV-10 Advance Mark-10
1
- ADV-OPT - Advance Optanium
1
ADV-ESS - - Advance Essential
1
ADV-ROVR - ADV-ROVR Advance Rover
1
LUT-EHD LUT-EHD LUT-EHD Lutron Ecosystem H-Series
1
LUT-2W - - Lutron Tu-Wire
1
LUT-EC5 LUT-EC5 - Lutron Ecosystem
1
LUT-EC3 LUT-EC3 LUT-EC3 Lutron Eco-10
1
LUT-TVE - - Lutron Tve
1
LUT-H3D LUT-H3D LUT-H3D Lutron Hi-Lume 3D
1
- - LUT-ECD Lutron Ecosystem (347V Only)
1
1- Voltage must be specified for dimming ballast.
4
#LAMPS/LAMP TYPEFIXTURE SIZE
4 - 4’
SERIES
OW2IP-
Oracle Wet
Location
Vapor Tight
IP
OW2IP
(1 lamp/32W/T8)
(2 lamps/32W/T8)
(1 lamp/28W/T5)
(2 lamps/28W/T5)
(1 lamp/54W/T5HO)
(2 lamps/54W/T5HO)
1-32-T8
2-32-T8
1-28-T5
2-28-T5
1-54-T5H0
2-54-T5H0
OTHER OPTIONS
CH
- Heavy Duty Chain
MS
- Motion Sensor
MSPH
- Motion Sensor with Photocell
WLMS
- Wet Location Motion Sensor
GSS
- Gripple Suspension System
VH
- V Hook
SSL
- Stainless Steel Latches
OW2IPSR
- Specular Reflector
SSLTP
- Stain Steel Latches with Tamper Proof
PCLTP
- Polycarbonate Latches with Tamper Proof Screws
USA - Made in America Compliance
EMERGENCY BATTERY PACK OPTIONS (L. = LUMENS)
ORDER CODE DESCRIPTION
EMG-T8-BX-450
Up to 450 L. for T8 or BX
EMG-T8-BX-600
Up to 600 L. for T8 or BX
EMG-T8-BX-700
Up to 700 L. for T8 or BX
EMG-T8-BX-1400
Up to 1400 L. for T8 or BX
EMG-T5-T5HO-700
Up to 700 L. for T5 or T5HO
EMG-T5-T5HO-1300
Up to 1300 L. for T5 or T5HO
EMG-T8-BX-T5-T5HO-3200
Up to 3200 L. for T8, BX, T5 or T5HO
EMG-SD-T8-BX-T5-T5HO-1400
Self-Diagnostic 1400 L. for T8, BX, T5 or T5HO
EMG-ICE-T8-BX-T5-T5HO-1400
ICE Pack 1400 L. for T8, BX, T5 or T5HO
SHIPPING AVAILABLE
Wet Location 4’ Vapor Tight Fluorescent
Ordering Information EXAMPLE: 4-OW2IP-2-32-T8
APPLICATION:
The OWIP series is suitable for wet location areas. Common
applications include parking garages, schools, industrial facilities, and
stairways.
PRODUCT FEATURES:
• Integral Molded Latch retention pockets securely locks in
polycarbonate latches. Stainless steel latches available upon
request.
STRUCTURALLY RIGID FIBERGLASS BODY
• Fiberglass is reinforced polyester and self-extinguishing (ASTM
D635-74). This type of construction does not allow the body to flex
during handling and installation.
GASKETED DIFFUSER RETENTION SLOT
• The gasketed inverted U-slot provides a positive continuous seal
between body and diffuser.
• Continuous poured gasket completely fills channel for maximum
seal integrity
HIGH IMPACT ACRYLIC/DR DIFFUSER
• Internal crepe pattern allows a smooth exterior surface for ease of
cleaning.
• The diffuser flange fits snugly into the gasketed retention slot
forming a continuous seal.
• Optional 95% reflective silver reflector. (See Gear tray on page 112)
• CEE qualified ballast found standard on most fixture options
(Consult factory for details).
LISTING
• UL/ C-UL listed to US and Canadian standards.
• IP65, IP67 Rating. (See Gear tray on page 112)
WARRANTY - Guaranteed for one year against mechanical defects.
50”
6-5/8”
4-7/8”
T8/T5
OW2IP
65,67
Catalog Number
4-OW2IP
Project Name
Type