User Manual

112
                      




.020 Nominal Thickness
95% Reectivity
Provided With A Protective Film For Easy Handling
Surface Is Absolutely Free Of Iridescent Colors
Offers Outstanding UV Stability Benets
Improved Performance
Increased Lumen Levels In The O-90 Zone
Available For Both T5 And T8
Batwing Distribution Provides Uniform Horizontal Illumination
Approvals and/or Listings
Underwriters Laboratories(UL)
NSF International, U.S.
Department of Agriculture,
Canadian Standards Association
Increased Spacing Criteria. Wider Light Distribution Can Require Fewer Fixtures


Standard
Specular 95%
Reective
   
75
82
5,600
5,600
4,200
4,592
60
60
70
77

ACCESSORIES SECTION
1

Protection against ingress of dust and low pressure jetting water
as per
IEC 60529 standard.
Component requirements to achieve rating:
All 4 foot housings that contain 6 latch pockets
All 8 foot housings that contain 10 latch pockets
All 4 foot and 8 foot diffuser styles
All conduit entries must be properly sealed

Protection against ingress of dust and temporary immersion in
water as per IEC 60529 standard.
Component requirements to achieve rating:
All 4 foot housings that contain 8 latch pockets
All 8 foot housings that contain 14 latch pockets
All 4 foot and 8 foot diffuser styles
All conduit entries must be properly sealed



Tape Gasket
Conventional
Poured Gasket
New & Improved
Poured Gasket
NEW
T8/T5
OWIP