DIGITAL AUDIO PLAYER (ORC-100) User Manual ORACOM Co., Ltd. 3rd. Fl. A-Sung Bldg. 999-3, Daechi-dong, Kangnam-gu, Seoul, Korea 135-280 TEL: 82-2-563-5633/FAX: 82-2-563-8774 -1- www.oracomm.co.
# CONTENTS # @ PREPARATION ■ Feature ■ Checking parts ■ Names and functions of ORC-100 @ INSTALLATION AND USE ■ Turning on/off the power ■ Setting the modes ■ Playing back digital music/voice files ■ Adjusting the volume ■ Searching music/voice file ■ Setting the section repeating function ■ Recording voice ■ File information display function ■ Bookmark function ■ Adjusting tempo ■ Setting hold function ■ Button table @ APPLICATION ■ Setting the menu ■ Setting the repeat function ■ Setting the equalizer fun
@ PREPARATION ■ FEATURE ° Compact and slim design ° Plug & Play and convenient data sending & receiving without file manager (When using Windows 98/SE, USB Device Driver is needed.
@ INSTALLATION AND USE ■ TURNING ON/OFF THE POWER ° Press the ▷□ button on the ORC-100 to turn on the power. Digital music/voice file will be played back after logo displaying. ° Press the ▷□ button on the ORC-100 for longer than 2 seconds to turn off the power. If the unit is in the Stop mode for longer than 1 minute, it will power off automatically. (Normal mode) (Watch mode) Note) If the display panel is in watch mode, then, it converts into a watch display mode.
ORC-100. * VBR(Variable Bit Rate) file: MP3 file which has multi compression rates applied ° To move the desired spot of the song during playback Press the ◀◀ / ▶▶ button for longer than 1 second and release the ◀◀ / ▶▶ button at the desired spot of the song. ■ SETTING SECTION REPEATING FUNCTION ° To set a start point of section repeating Press the mode button briefly at the start point of the desired section repeating during digital music/voice playback. Then, the icon brinks on the display panel.
In the case of voice mode - Play information: File name and Time - CODEC information: Bit rate and Sampling Frequency - File information: File name, File size, and Date of File created - Timer: Sleep, Setting-up Wake up Time - Logo: Setting Logo ■ BOOKMARK FUNCTION It is function of moving appointed specific spot of music/voice file. ° To bookmark Press B button to bookmark for longer than 1 second during music/voice playback.
■ BUTTON TABLE Button ▷□ ▶▶| Former status Operation Power off Briefly Playback after power off Music playback Voice recording Briefly Stop Music playback Voice recording Stop Longer Power off Stop Briefly Playback/recording Menu status Briefly To exit menu Playback Briefly Playback the next file Playback Longer Fast backward search in playback file Stop Briefly To move the next file Menu status Briefly To move in the menu Time set Tempo button use |◀◀ Push time Briefly/lo
@ APPLICATION ■ SETTING THE MENU ° Press the mode button for longer than 1 sec., and it is converted to the menu mode. When selecting, use the mode button and when moving the different order, use ◀◀ / ▶▶ button. ° Pressing ▷□ button is to cancel the menu mode.
- Bass: Setting the bass from -5 to +5 - Treble: Setting the treble from -5 to +5 ■ MANAGING FILES ° Select the file in the menu mode. Select with the mode button after moving the desired file mode with ◀◀ / ▶▶ button. ° To delete To select the place of the deleting file after selecting "delete". Delete to select the mode button after moving the file that you want to delete. ° Format All files of the memory are deleted if the format is selected. Caution) All files are deleted when executing the format.
■ SETTING DISPLAY FUNCTION ° Select display in the menu mode. Select with the mode button after moving the desired display mode with ◀◀ / ▶▶ button ° Backlight The backlight in the display panel can be controlled 1. Always: Turned on always 2. Night: Turned on accordance with the time. 3. Never: Not turned on 4. Lighting Time: The lasting time of backlight Set the time to press ◀◀ / ▶▶ button. Note) If Never is selected, battery is saved. ° Contrast Contrast can be controlled in the display panel.
■ SETTING THE TEMPO ° The tempo can be adjusted with the volume control button( + - ). Select the tempo in the menu mode to use the volume control button to the tempo control button or to adjust the tempo. Select the mode button after moving the desired tempo mode with ◀◀ / ▶▶ button.
■ MENU TABLE MENU Repeat 1.Normal 2.Repeat one 3.Repeat all Repeat list 4.Repeat list ▶ 1.file1 5.Shuffle 2.file2 6.Intro 3.file3 ... Return Return EQ User 1.Default 2.User ▶ Return 1.Bass Bass / Treble 2.Treble Return File Delete 1.Delete ▶ 2.Format ▶ Return Music/Voice Format 1.Music ▶ 1.M/V file1 1.OK 2.Voice ▶ 2.M/V file1 ... 2.Cancel Return Return Watch 1.Set time ▶ Set time 2.Set timer ▶ 2002/01/01[MON] 1.Alarm TM 3.Use watch ▶ AM12:00:00 2.
@ COMPUTER CONNCETION ■ INSTALLING USB DEVICE DRIVER FOR WINDOWS98/SE Note) Do not need to install the driver again after installation for use of windows98/SE ° Insert the installation CD supported to "CD-ROM driver" in PC and plug ORC-100 into PC's USB port. Click on the next button when the pop-up diagram shows as below. ° Check "Search for the best driver for your device " and click on the next button when the pop-up diagram shows as below.
° Check "CD-ROM drive" and click on the next button when the pop-up diagram shows as below. ° Click on the next button when the pop-up diagram shows as below..
° Click on the button to finish the installation Now the driver has been installed into your system. ■ CONNECTING ORC-100 TO PC ° Turn on the PC power Connect PC connection cable to USB port on the PC "Removable Disk" folder is made in the My Computer of the Window Explore. ° The usage is the same as floppy disk or hard disk. When ORC-100 is removed from PC, the Removable Disk is disappeared in the My Computer folder.
The message, Waiting shows in the display panel of ORC-100 while connecting to PC. ■ MANAGING FILES ° There are MUSIC, VOICE, and LOGO folder in the Removable disk and they are still existed even if formatted. ° To download the music file. Save the music file in the MUSIC folder. The display panel in ORC-100 shows as below while downloading the file. Caution) Do not remove ORC-100 from PC even if PC monitor says finished when PC<->Player (▶) is moving in the display panel of ORC-100.
Caution) If any other folders are used except LOGO or any folders are made in the LOGO folder for the input of the logo file, the logo can not be displayed in the display panel. ■ FORMATTING ° Click on the right side of the mouse after selecting removable disk. Select format in the menu and click on the "start". ° Use ORC-100 when formatting is completed because ORC-100 is formatted again after formatting in the PC. Note) It is possible to format with the function, Menu->File->Format in ORC-100.
@ LOGO EDITOR ■ INSTALLING LOGO EDITOR ° Install the logo editor program supported from CD. ■ EDITING LOGO ° To use the frame function - What is the frame function? It is the logo editor function to make several pictures into one logo and to show the logo in the display panel continuously.
° The example of the third page for frame ° To import the picture file Select the import icon ( ) in the menu icon. Select the desired picture file to click on the Open button as below. Transfer the logo to the Logo Editor if the desired logo is made The desired logo is made in the display panel of the Logo Editor as the sample above.
Save the logo file to click on the Save button. ■ INSTALLING LOGO ° Save the logo file made by the logo editor in the LOGO folder. Caution) If any other folders are used except LOGO or any folders are made in the LOGO folder for the input of the logo file, the logo can not be displayed in the display panel. ° Select Display->Logo->User in the menu mode and the display panel of ORC-100 shows your own logo after the power-off.
@ LISTENING VOICE RECORDER FILES ON PC ■ INSTALLING VOICE FILE CONVERTING PROGRAM ° Install converting voice recorder files supported from CD. ■ CONVERTING VOICE RECORDER FILES ° For listening voice recorder files on PC, please convert vrf file(Recorded voice) to wave file after uploading voice recorder file on PC ° Please click on convert button after inputting file name in the editor box or choosing file in the menu. ° Filename.vrf file will be converted to filename.
@ CUSTOMER SERVICE ■ PRODUCT SPECIFICATION ° Memory Capacity: 32/64/128/256MB built in memory ° Communication Method: Supporting USB 1.1(Plug & Play) ° Earphone Output Power: 6.0mW / 16Ω ° Noise ratio: 87dB / 0.1% (with 'A' filter ) ° Output Frequency Range: 20Hz ~ 20KHz ° Operating temperature: 0 ~ 40C ° Battery: 1 x AAA size ° Supporting OS: Windows98/SE,ME,2000,XP, Mac 8.6 or higher and Linux kernel 2.4.0 or higher. ° Case: plastic ° Dimension: 56 x 56 x 11.
and tear. * Abuse or misuse, including but not solely limited to the failure to use this product for its normal purposed or in accordance with Oracom's instructions usage and maintenance. * Failure of the product arising from incorrect installation or use not consistent with technical or safety standards in current force, or failure to comply with product manual instructions.
